Open an SLDPRT file
in Tinkercad.

Updated 2026-10-27

Tinkercad cannot open an SLDPRT. Its 3D import takes STL and OBJ files under 25 MB. Convert the part to STL below and click Import in the Tinkercad editor. The part comes in as one solid shape. You can move it, scale it, combine it with other shapes, or turn it into a hole.

No account needed
Drop an SLDPRT file.sldprt · up to 200 MB

On our servers. No account: deleted within 24 hours. Signed in: kept until you delete them. Never shared or used for training.

TinkercadSLDPRT → STL

What a SOLIDWORKS part becomes in Tinkercad

Tinkercad makes the whole STL one shape, and its help says an imported file cannot be ungrouped into parts. A multibody SOLIDWORKS part comes in as a single block. If you need its bodies apart, export them one at a time from SOLIDWORKS.

Turning the part into a hole is often the most useful thing to do with it. Import a motor, a sensor or a phone body that someone modelled in SOLIDWORKS. Make it a hole and group it with a box, and you have a holder with a pocket of exactly the right shape. Scale it up a little first if the part needs clearance.

Tinkercad shows scale settings after the upload and before the model loads. The STL is in millimetres, so pick the setting that reads the numbers as millimetres. A part that looks 25 times too big was read as inches.

ResultSLDPRT → STL

Staying under 25 MB

At Standard detail the STL is the part's own display geometry, which keeps most parts well under the limit. Do not pick Ultra detail for Tinkercad. It adds many more triangles, and Tinkercad refuses files over 25 MB.

Questions4 answered
Why can't I ungroup the imported part?
Tinkercad always imports an STL as one solid shape. Export separate bodies from SOLIDWORKS if you need them apart.
My file is over 25 MB. What now?
Convert at Standard detail, which gives the smallest file. If it is still too big, the part is unusually detailed. Simplify it in a mesh tool first.
Can I use the part as a cut-out?
Yes. Set the imported shape to Hole and group it with a solid.
Is the conversion free?
Yes, 5 a day without an account.

Tinkercad's import formats were checked against its own documentation on 2026-10-27. The FAQ covers daily limits, file sizes and deletion.

MoreRelated

SOLIDWORKS® is a registered trademark of Dassault Systèmes SolidWorks Corp. MeshWeave is an independent tool and is not affiliated with, endorsed by, or sponsored by Dassault Systèmes. Tinkercad is a trademark of Autodesk, Inc.. MeshWeave is independent and not affiliated with or endorsed by Autodesk, Inc..