To get a SolidWorks 2025 or 2026 part into 2024, drop it below and download yourpart_SW2024.SLDPRT. It is a native 2024 part with the solid as one imported body. 2024 is the oldest release we write a native part for. It is also the oldest release a 2026 seat can save back to.
2 solid-geometry conversions a day with no account. Parts only, no SolidWorks needed.
On our servers. No account: deleted within 24 hours. Signed in: kept until you delete them. Never shared or used for training.
Updated 2026-10-27
A 2025 part is one release ahead. From 2024 SP5 it opens read-only as a Future Version. You can measure it and use it in a 2024 assembly or drawing, but not edit it. A 2026 part is two releases ahead, and no 2024 service pack opens it, because Future Version only works one release ahead.
Both 2025 and 2026 can Save As 2024 from a seat with an active subscription. Use that when you need the feature tree and the save goes through. The Previous Release Check cancels it when the part uses something 2024 does not have. For example, SolidWorks 2025 added automatic bend notches on sheet metal flat patterns, so a 2025 sheet metal part may need work before it saves back.
You get the finished shape as one body. You can measure it, mate it and add features to it, and nobody needs a 2025 or 2026 seat. If the part has several bodies, the converter asks first. You can choose every body in one .x_t part, an assembly with one part per body, or the first body alone as a 2024 .SLDPRT. Only parts convert, so a 2025 or 2026 assembly comes across one part at a time.
2024 is also the release that introduced Save As previous version. So a 2024 seat can save parts on to 2023 or 2022 for someone on an older release. Open the result in 2024 before you rely on it, and tell us if one fails there.
Every download says which of three results it is. You get the part's own surfaces when they can be read, surfaces rebuilt from its display mesh when they cannot, or flat facets when that fails too. The feature tree never comes across.
SOLIDWORKS® is a registered trademark of Dassault Systèmes SolidWorks Corp. MeshWeave is an independent tool and is not affiliated with, endorsed by, or sponsored by Dassault Systèmes.