Updated 2026-10-27
Fusion can open an IGES file as it is. Autodesk's format table ticks IGES import for Personal Use as well as commercial subscriptions. Only IGES export needs a commercial subscription. So upload the .igs or .iges from the Data Panel, or use File, Open, Open from my computer. The converter below is set to STEP for the two cases where converting still helps.
On our servers. No account: deleted within 24 hours. Signed in: kept until you delete them. Never shared or used for training.
The first case is when the next person needs STEP. Someone downstream may not accept IGES, and Personal Use cannot export it anyway. The conversion is exact. Planes, cylinders and NURBS surfaces stay the same, and nothing is turned into facets.
The second case is finding faults. An IGES often holds a model as separate trimmed surfaces that were never joined into a solid, sometimes with small gaps. A CAD system that imports it gets surfaces, not a solid. The converter checks the IGES as it reads it and reports invalid faces or open shells. So you know before uploading whether you will get a solid.
The conversion does not close those gaps. Loose surfaces stay loose in the STEP. If the IGES is a set of surfaces, ask the sender for a STEP exported from the original model, or join the surfaces yourself.
The geometry of the IGES, surface for surface, in millimetres. IGES colours, levels and other attributes are not carried over. It is a solid conversion, so it counts against the smaller daily allowance. A file that fails to convert is not counted.
Fusion's import formats were checked against its own documentation on 2026-10-27. The FAQ covers daily limits, file sizes and deletion.
Fusion is a trademark of Autodesk, Inc.. MeshWeave is independent and not affiliated with or endorsed by Autodesk, Inc..